Clarity Gateway
  • Setup
    • Getting Started
      • Mounting and Wiring
        • Power and Ground Connections
        • Flexible I/O Connections
        • Serial Connections
        • USB and Ethernet
      • Network Layout
      • Accessing Clarity Gateway Web Interface
      • Setting Password
      • Entering License Key
      • Changing the IP address
      • Updating Software
      • 3rd Party Devices
        • Running the Installer Script
        • Moxa UC-8100-ME Setup
        • Runnning Clarity Gateway on a 3rd Party Device
        • Password Recovery on 3rd Party Devices
    • SSH Access
    • Serial Console Access
    • Adding USB Storage
  • Connections
    • EtherNet/IP
      • Adding an EtherNet/IP Connection
      • Receiving values from EtherNet/IP
      • Sending values to EtherNet/IP
    • MQTT
      • Adding a SparkPlug MQTT Connection
      • Adding a Text/JSON MQTT Connection
      • Sending values to MQTT
    • Modbus
      • Sending values to Modbus
      • Receiving values from Modbus
      • Adding a Modbus TCP Device
    • Local I/O
      • Configuring Analog Inputs
      • Configuring Digital Inputs
      • Configuring Digital Outputs
  • Transfer Data Between Connections
  • Channels
    • Setting Clarity Metadata
  • Other
    • Recovery
    • Settings Import/Export
      • Exporting Settings
      • Importing Settings
Powered by GitBook
On this page
  1. Setup
  2. Getting Started

Network Layout

PreviousUSB and EthernetNextAccessing Clarity Gateway Web Interface

Last updated 24 days ago

The Iron Pi should normally be connected alongside your data sources on a private local area network. the Iron Pi is addressed by default to operate on a 192.168.1.x network, but you can to operate in other address ranges like 10.1.1.x.

In most cases, a NAT router or modem should connect the private LAN to the public Internet.

change its network settings